What kind of SUNGOLDPOWER 4000W Peak 12000W Pure Sine Wave Split Phase Power Inverter do you need?
1. This Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch.Low frequency,low Idle Current,remote control. 2. Adjustable Charging Current The max charge current can be adjusted from 0 -100 via a liner switch at the right of the battery type selector. This will be helpful if you are using our powerful charger on a small capacity battery bank.the liner switch can effectively reduce the max charging current to 20 of its peak.Choosing 0 in the battery type selector will disable charging function. 3. AC Battery Priority Our inverter is designed with AC priority by default, when AC input is present, the battery will be charged first, and the inverter will transfer the input AC to power the load. the inverter can be easily customized to Battery priority via a DIP switch, When you choose battery priority, the inverter will invert from battery despite the AC input.. 4. Auto Gen Start the inverter can be customized to start up a generator when the battery voltage goes low.When the inverter goes to low battery alarm, it can send a signal to start a generator, and turn the generator off after battery charging is finished. The auto gen start feature will only work with generators designed to work with this feature.. 5. Protections AC input over voltage protection AC Input low voltage protection Low battery alarm High battery alarm Over temperature protection Over load protection Short Circuit protection 1s after fault Back feeding protection
Do you know what is the superiority of this SUNGOLDPOWER 4000W Peak 12000W Pure Sine Wave Split Phase Power Inverter?
1.Low Frequency Pure Sine Inverter With Charger
2.AC Battery Priority Selector
3.Automatically Generator Start
4.Safety and Convenient
5.The low freqency inverter can power all kinds of appliances
6.LCD Display, Remote Control
7.Low Idle Consumption
8.battery type settings for charger
9.Multi Stage Smart charger 40 -5A, charger can be disable
10.10msec typical transfer time
Charger Rate 40 -5A
AC input Range Grid or Generator 140V-270VAC 184V-253VAC select by SW2
Over Charge Protection Shutdown 62.8V
Selectable Charge Setting based on battery type
Adjustable charge current off 0 -100
3-step intelligent battery charger
Continuous Output Power 4000 Watts
Surge Rating 12000 Watts 20 Seconds
Output AC120V and AC 240V ,60HZ
AC Input 240V
Output Wave Pure Sine Wave bypass mode
Typical Transfer Time 10ms MAX
Nominal Efficiency 88
4000W 48V Low Frequency Pure Sine Inverter
Unit Weight 53lbs
Unit Size L x W x H
Shipping Weight 57lbs
Shipping Size L x W x H 23×12.6×12.0inch
Nominal Input Voltage 48.0Vdc
Minimum Start Voltage 40.0Vdc
Low Battery Alarm 42.0Vdc-44.0Vdc
Low battery Trip 40.0Vdc-42.0Vdc select by SW1
High Voltage Alarm 64.0Vdc
Low battery Voltage Restart 52Vdc
Idle Consumption 48 Watts
Power Saver Mode Idle Consumption 19.3 Watts
Battery type selector 8 battery type settings
Charging Current Control The max charge current can be adjusted from 0 -100
Power save function on line
Over load trip
Over temperature trip
Charger on float charger mode
Charger on fast charger mode
Inverter power on line,battery charger off
Shore power on line battery charger active
Auto Generator Start The inverter can start up a generator when battery voltage goes low.Generator power should be 1.5 times higher than the inverter power.
AC Battery Priority The AC Priority and Battery Priority switch is selected by SW5.
Remote Control Comes with 33 foot connection cable, control the power on off
240V split phase
Input Hot line Hot line Ground
Output 1 Hot line Hot line Neutral
Output 2 Hot line Neutral
1.The output voltage of this unit must never be connected in its input AC terminal, overload or damage may result.
2.Always switch on the inverter before plugging in any appliance.
Customer reviewsLots of information displayed on machine while running.
Five stars, especially with the price.