What should you look for when buying Remington RM1035P Ranger II 8-Amp Electric 2-in-1 Pole Saw Chainsaw?
2-In-1 functionality logs on the ground Use the quick release button to detach the saw from the pole to convert the unit from a pole saw into a chainsaw. No tools required . Long reach designed with a shaft extendable up to 10-feet for high branches. With operator Height considered, the pole saw can cut limbs 10-feet to 15-feet overhead. The saw head includes a branch hook to aid in clearing hung-up limbs.. Electric Powered an 8-amp inline electric motor instantly starts to drive the chain over the low-kickback, automatically Oiled 10-inch Bar.. Adjustable a telescoping design paired with flip and lock clamps allow the operator to quickly adjust the length of the pole saw so that trimming trees of varying heights isn t a hassle.. Prune in comfort anti-rotation shaft and non-slip grip enhance comfort and stability during use.. Note Bar and chain oil may seep from unit when not in use. Remember to loosen the saw chain with the tool-free tensioner if it was Adjusted during operation.
Do you know what is the superiority of this Remington RM1035P Ranger II 8-Amp Electric 2-in-1 Pole Saw Chainsaw?
Remington Power Tools are engineered to be reliable and easy to use. Our outdoor yard tools can take on any task from minor tree trimming to whipping an overgrown yard into shape. Just like the first products sold almost a century ago, each tool built today is designed to be efficient, durable and deliver more than enough power for the job at hand.
When you need to go that extra mile, Remington has you covered. Taking down hard-to-reach branches is one of the most important parts of yard maintenance. This 2-in-1 pole saw chainsaw features a full wrap handle allowing for more maneuverability and versatility while cutting. And because the cord and hand-guard are always at the bottom of the pole, there are fewer snag hazards when you re in pole saw mode. Perfect for trimming branches up above your head. It also features a push-button quick change that allows you to convert to a chainsaw easily, without tools, so you can cut up those downed branches in no time.
Switch from pole saw to chainsaw with no tools at all to take on a variety of other cutting tasks.
Quickly secure pole length with nonslip grip for comfortable use.
Cut through overhead branches with less kickback, thanks to the special 10-inch bar chain design.
Optimized 8-amp motor is lightweight, yet a powerful enough tree trimmer to cut through most branches.
The extendable 10-foot aluminum pole helps you reach and trim tree limbs as high as 15-feet depending on user s height , while the handy flip lock clamps ensure your saw is secured in place. The instant start, electric 8-amp motor powers through small to medium branches with ease. When you ve finished taking down branches from above, the pole can be quickly disconnected so you can use the chainsaw to slice branches down to a more manageable size.
When you need to go that extra mile, Remington has you covered. Taking down hard-to-reach branches is one of the most important parts of yard maintenance. This 2-in-1 pole saw chainsaw features a full wrap handle allowing for more maneuverability and versatility while cutting. And because the cord and handguard are always at the bottom of the pole, there are fewer snag hazards when you re in pole saw mode. That s good when you re trimming branches up above your head. It also features a push-button quick change that allows you to convert to a chainsaw easily, without tools, so you can cut up those downed branches in no time.
Customer reviewsOnce again, the mind is more powerful than brute strength...
Several people have commented on the weight of this saw extended out on the easily adjustable, 10 foot pole, but I can tell you from experience, that really isn t an issue if you use your thinking ability first. After buying this saw several months ago, I finally got the time and opportunity and ambition to go out and trim up my 30 year old, four-trunk, clustered oak tree in the front yard. The first thing I did was study the tree and where exactly I needed to make cuts - either to trim out dead branches, or uneven growth, or branches that could threaten my roof during a storm. After figuring out WHERE I wanted to make my cuts, I had to decide just HOW to make those cuts. I m no weakling, but I don t have tremendous upper body strength either, so I had to figure out how I was going to make the cuts without harming the saw or myself in the process. Fortunately, this saw is well designed, with an offset cutting angle and an integrated hook to help hold it in place once the saw is positioned, so I simply lifted the saw almost vertically until the chain blade was on top of the limb I wanted to cut MUCH easier than approaching the limb at a 30 to 45 degree angle . At that point I moved slightly away from being directly below the part of the limb coming down and pulled the trigger. Gravity is your friend when using this saw because the weight of the saw at the end of that 10 foot pole is largely supported by the limb being cut, and the natural cutting direction is assisted by gravity. The only challenge there was making undercuts on some the the heavier, thicker limbs before cutting them from above, but even that was manageable, thanks to that angled, self-lubricating cutting head. Once the limb is cut VERY quickly done with this sharp cutting chain it s a matter of sliding your hand s further up the pole toward the center of the pole - better mechanical advantage or leverage to prevent the saw from crashing to the ground. Once the tree limbs were on the ground, quickly converting this saw to a small, normal chainsaw was quite literally a snap, with no tools required. I found cutting the limbs out of the tree to be the easy part. After the limbs were cut from the tree came the hard part of cutting everything into four foot lengths for the trash company to haul it all off. I used bypass loppers for the smaller branches because that was much quicker, and it preserved the sharpness of the chainsaw for the thicker branches. I bought this saw on sale and it did a superb job, saving me about 250, PLUS THE COST OF THE SAW that I d have spent hiring someone else to trim up my tree, and this way I got the tree trimmed up just as I wanted it to be no severe cutting back and endangering the future health of the tree . This pole chainsaw is well designed and very well made, and after my experience with using it, I will no longer dread using it in the future. As a homeowner who routinely does my own yard maintenance, I consider this saw to be one of my better purchases.