What kind of Power Inverter Pure Sine Wave 600Watt 12V DC to 110V 120V do you need?
Features
This pure sine wave inverter provides 600Watts continuous power and 1200Watts peak power,featuring 2 AC outlets and 1x2.1A USB ports. Widely Applications the dual 110V 120v AC outlets Provides 600 watts continuous power for most of appliances like fans,fridge,freezer,CPAP,Laptop,air compressor,Medical device etc. With a Remote Control cable length15ft,convenient to control ON OFF and ideal for Camper, RV, Truck,Car,Solar system. Fully Safety Protections Over voltage,Low voltage,Overload,Short circuit,Over heat protections. Isolated Input Output design,Low interference technology,more safe.. Strong and Durable aluminum alloy housing provides advanced protection from drops and bumps. Integrated cooling fan helps reduce heat and prevents shortages.18-Months Warranty
Do you know what is the superiority of this Power Inverter Pure Sine Wave 600Watt 12V DC to 110V 120V?
Description
About GIANDEL
GIANDEL is a professional Power Inverter supplier and has been a leading inverter brand in Australia.
GIANDEL pure sine wave inverters are more compatitable and widely used for inductive loads such as Laptop, Linear Adaptor, switching power supply, transformer, motor,freezers,fans and so on. They decrease the rush current and have lower interference,reduce the noise,prolong the device life.
Specifications
Power 2 AC Outlets 600W Rated,1200W peak
Max Efficiency 90
THD 3
USB output 1xDC 5V 2.1A max
Output wave form Pure sine wave
Nominal input voltage 12V 9.8-16VDC
Nominal output voltage 110-120VAC
Internal fuses 30A
Battery cables 9AWG one pair with length of 2 ft.
Remote controller remote controller with 15ft cable. More convenient to control the inverter ON OFF
No load current 0.7A
Fully safety protections
Input over-voltage shutdown 16VDC 0.5V
Input under-voltage shutdown 9.5VDC 0.5V
Input under-voltage alarm 9.8VDC 0.3V
Over temperature protection 65 5
Over-load protection 601W-750W
More details and tips
Connect the inverter to a 12V battery with the standard cables provided with product, and plug your AC devices into the inverter
Please do not leave the power inverter in the ON position while your car is off.
Disconnect the positive battery terminal before doing any wiring to the inverter
Do not put the inverter into sunlight directly, keep it in cool and dry environment
Don t use the inverter with a product that draws a higher wattage the inverter can provide,as this may cause damage to the inverter and product
Package List
1x 600W Sine Wave Power Inverter 2x Battery Cables Remote with 15 ft Cable
1xUser Manual8xshockproof pads Shockproof pads Manual
Customer reviews
UP DateI took the Giandel 600W camping expecting to use it for powering mattress air pumps and charging phones and computer pads. Because of time restraints I did not check it out before I went camping At camp, I hooked this unit to an auxiliary battery and was not able to generate any AC voltage with the Giandel 600W. I found the red battery wire and clamp that connects to the battery was open, photo 1. Cold very cold solder joint and a nonexistent mechanical connection. If I had a soldering iron I could have temporarily repaired this defective connection oh, I could not have powered the soldering iron without AC power . It is obvious that this cable was not checked before shipment, poor quality control. Also, the other end of the battery connecting cables were poorly crimped, wires frayed and crimped without any effective strain relief, photo 2. Note a small length of 8AWG 4.064 mm is shown for comparison, the provided wire is smaller, needs to be larger wire for efficient power transfer.
See more 51 reviews on this product
Compare with similar items
| Similar Item | This Item | Similar Item |
|---|---|---|
 |
|
 |
| $93.99 | $109.96 | $51.99 |
| Sold by:WindyNation | Sold by:Giandel | Sold by:BSCstore |
| (51 ratings) | (99 ratings) | (36 ratings) |
